We offer 3 different washbasin materials. Learn more about our washbasins:
Cast mineral material is a very durable and resistant polymer material that can be perfectly formed in a casting process. This enables outlandish designs in the widest range of colours and shapes to be realized. The gloss finish of the cast mineral material washstand is created by a special coating, the gelcoat. The gelcoat is non-porous and gives the washstand the best properties in use and a perfect hygienic, joint-free surface.
Ceramic is a natural product. In the creation process, a mass of clay minerals is fired at over 1,200°C with an additional surface glaze. Ceramic washstands are characterised by their smooth, dense finish which is resistant to scratches. Ceramic is therefore very easy to care for and hygienic. Even extremely hot water, alkaline cleaning agents and scouring creams do not leave any trace on the surface. Ceramic is an all-rounder!
Glass washstands are just as exceptional as those of cast mineral material and ceramics. In terms of stability and resistance, the safety glass has practically the same properties. The non-porous and smooth finish of glass ensures that even strongly acidic chemicals cannot cause any damage. The coating also allows water to bead off very well. The surface is resistant to scratches. Thanks to the stylish appearance, the glass washstand transforms the bathroom into a true work of art.
Melamine coated The basic shell meets the DIN 68765 standard. All the panels used are made of 3-layer chipboard, melamine resin-coated on both sides and hence extremely easy to clean, and of course complying with emissions category E1. All the basic shell edges are coated (with white edge rear). All the front basic shell edges (visible edges) are covered with a thick edging strip, for better product use and for safety.
Foil coating DIN 68765 applies to the body. All panels are MDF panels, onesided, with glossy plastic coating. Coated on the back with MF resin and thus easy-to-clean and complying with emission class E1. The rear panels in all the basic shell models are set back and mounted in grooves, enabling good ventilation between wall and furniture.
Full metal clip-on hinges (incl. Softclosing) The hinges are adjustable in three dimensions, and have an opening angle of ca. 108° (except for bevelled cabinets). This provides easy access to the inside of the cabinet. The clip-on technique enables the doors to be easily hung and removed, without tools. As a result it is easy to clean the basic shell and the door edges thoroughly. With the new door suspension system, the doors close softly and quietly even if they are shut with force. It adjusts itself to the closing speed and weight of the door.
Metal drawers The drawers/extensions run as if on air, on concealed runners – fully extending in every case, including damped auto-retract and non-return device. All the drawers/extensions can be fitted and removed without any tools. The fronts can be adjusted horizontally by 1 mm on each side, and vertically by 2mm. The angle of the–front panel can also be adjusted. The total permissible load is 30 kg per drawer und 30 kg per drawer. The storage space can be perfectly subdivided by means of internal dividers (optional).
Wall-hanging To enable easy installation and perfect alignment of the cabinets, we have used full metal wall-hanging fittings with a load-bearing capacity of 75 kg each, thus offering a high degree of safety. All the cabinets are intended for attachment to the wall.